Variable FPS Mod Kit (GHK AK)

NOTE: I AM NOT RESPONSIBLE IF YOU DECIDE TO MODIFY YOUR EQUIPMENT. YOU MAY VOID ANY WARRANTY BY FOLLOWING THIS TUTORIAL!!!

Overview: Modify a stock GHK AK nozzle to allow for on-the-fly FPS adjustment. No tap set required!

Why: You own a GHK AK, which shoots too hot for your field and you need to lower the FPS. At the same time you don’t want to permanently be stuck with a single FPS choice, and need to be able to dial in the FPS depending on the field you play at.

What does it do, and how: Screwing a small set-screw further into the stock nozzle constricts the airflow to the barrel, thus reducing FPS. Screwing the set-screw in & out will allow you to tailor your FPS for your specific field.
NOTE: You will not be able to increase FPS more than whatever the stock nozzle can achieve.

• M4-0.7 x 6mm set screw (Plus an alternate length M4-0.7 x 8mm screw)
  
• 3.5mm drill bit
  
• 2-part epoxy
  
• 3D printed washer (Printed in BLACK)
  
• 3D printed drill bit alignment tool (Printed in BLACK)
  
• Allen key

How to install this mod with the kit:
Click here to download the instruction packet which will walk you through the installation:
DOWNLOAD INSTRUCTIONS HERE

For bulk orders please contact me directly.

DISCLAIMER: Not for children under the age of 18. These products have ZERO compatibility with real firearms in ANY WAY SHAPE OR FORM. They are NOT replica firearms, and are ONLY compatible with toy airsoft.